AKKUS BOLG

The battery in a PC is often one of the most forgotten parts of the Dell akkus blog . It is quite important, too. It is what holds all of your CMOS settings while your computer is off. Without it, you would have to re-program your CMOS each and every time you turned on your Acer akkus blog .

The history of this is quite simple. The early PC’s from Apple akkus blog used HP akkus blog switches to set the system configuration. Later, though, they decided to transfer this information to bit-information stored in some static memory. This memory is low-power, obviously, and uses a form of static Toshiba akkus blog called Complementary IBM akkus blog (CMOS). Using a small, low-power battery, they could run just enough juice through this memory to get it to hold its content even when the PC is off.

Like any battery, the battery in your PC has a finite lifespan. Eventually, it will become weak and will no longer be able to Sony akkus blog of your CMOS. When this happens, you will turn your PC on one day and get an error message. Sometimes you will get a checksum error, or it will notify you that the system configuration doesn’t match the CMOS information. Well, that’s because there is no Fujitsu akkus blog information anymore because you need to replace your battery. And one problem is that users very seldom record their CMOS information or back it up.

This is usually a simple repair, but some notebook akkus bolg actually soldered the batteries in, making this a much tougher job. If your battery is soldered in, you may want to take the whole thing to the shop. If you’re experienced with soldering, then you can tackle it yourself. akkus dell blog is that most manufacturers are now using easily removed batteries, the kind about the size of a nickel and can be removed by moving a small prong.

Before you do anything, though, you should record what your computer is supposed to know. blog akkus dell is already dead, there’s nothing you can do. If your configuration is still there, though, record it. Go into CMOS and write down the info (HINT: You can write it real small and tape a copy inside your PC case). Easier yet, just go to those screens that are important andblog dell akkus button on your keyboard. There are also utilities out there that can backup your CMOS settings and record it to a diskette. This is quite convenient, especially when you don’t have a setup disk for the PC. After you remove the old battery, your computer will forget everything.